Welcome to BigJimny

BigJimny is YOUR resource for everything to do with Suzuki Jimnys.
If you are new to the site then REGISTER through the LOGIN button

There is a friendly, active FORUM to discuss Jimny related subjects and a web SHOP for all your parts needs.

AS WITH ALL WEBSITES YOUR ATTENTION IS DRAWN TO THE DISCLAIMERS . As this website does not require a login to access content, the accessing of this website and associated resources is deemed acceptance of these DISCLAIMERS. Do NOT progress if you do not accept the DISCLAIMERS

The owner and site administrator of BigJimny

Lil Red - SJ restoration - First Paint

Its time for painting to start!

First there were a couple of small repairs left to door, Earlier you would have seen small perforations that had appeared in the bottom of the door.

These were removed and cleaned out and then filler welds were added to create an all metal finish that was then smoothed back.

  1123 Hits
Tags:

Lil Red - SJ restoration - Patching completed

Processed-WhatsApp-Image-2023-02-27-at-15.23.071

 Work is really progressing this week over at Winchfield Engineering. The welding patching to the bodywork is complete. The welds have been ground back smooth and now a protective coat of epoxy and Cobra (for the undersides) is put on in the paint shop to protect the bare metal until the full painting starts.

The next stage should see the wings being re-fitted.

  1160 Hits
Tags:

Lil Red - SJ restoration - Welding has started!

Processed-7-WhatsApp-Image-2023-02-21-at-097

The restoration has turned a corner, things are starting to go back together rather than come apart.

The welding has started with patching/repairs of holes. 

NOTE: These pictures show work in progress, not necessarily completed, 

The most common place for corrosion on both SJ and later Jimnys is around the body mount behind the front seats.

The bodywork here is a sandwich of steel panels. Here the top panel has been cut and removed to reveal the rust in the panel behind which has then been cut out and removed (you can see the body mount!)

The holes are then plated over, closing them up.

  1274 Hits
Tags:

Lil Red - SJ restoration - Preparing the Roll Bar

IMG_20230218_152638907

James wanted a genuine rollbar for his SJ. Now we realise that these roll bars are little more than show items, they are not a competition grade roll bar but it is a factory restore so needs a factory roll bar.

We eventually found one on Ebay. It was not easy to find one but it has been even harder to restore it!. It comes with a white "plastic" coat that at first appears easy to remove as the rust is lifting it up. I took it to the Powder Coaters and they sent it back saying that it simply melted and flowed back whenever they blasted it. In other words, it could be done but would be too expensive in time and money. I then tried sanding, burning with a blow torch and peeling with a sharp edge. It simply would not come off. It took an abrasive wire wheel in an Angle Grinder and close on 4 hours work to shift it.

  1191 Hits
Tags:

Lil Red - SJ restoration - Ready for Welding

WhatsApp-Image-2023-02-15-at-13.24.38

After a lull in work its nearly time to start work on putting it back together. The welder came down to view and in discussions wanted some more sand blasting to be done before welding could commence.

Winchfield have a small sandblaster and a very large sandblaster. The large one is used for really heavy duty cleaning but has to be used outside to avoid filling the workshop with dust. 

  1163 Hits
Tags:
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.